G45
Standard equipment:
- Universal 3 points linkage cat. 2 and 3.
- 1 speed gear box P.T.O. 540 rpm.
- Drive shaft with shear bolt torque limiter SB .
- Paker Roller - Net Roller
- Lateral chain drive in oil bath.
- Double rear rake fit on springs.
- 6 blades for flange.
- Kit fixed flange for fasten blades
Optional equipment:
- Double transmission till to G45-300
- Gear Box PTO 1000 r.p.m
- Cardan shaft with clutch FF
- Cardan shaft with automatic torque limiter SC
- Rear clod bar with handles setting
- Hydraulic powered roller with lateral cone Ø 410mm till to 250mm
- Hydraulic powered roller with lateral cone Ø 510mm till to 250mm
- Hydraulic powered roller with lateral cone Ø 580mm till to 250mm
- Hydraulic powered roller with lateral cone Ø 410mm from 300mm till to 400mm
- Hydraulic powered roller with lateral cone Ø 510mm from 300mm till to 400mm
- Hydraulic powered roller with lateral cone Ø 580mm from 300mm till to 400mm
- Lateral hydraulic displacement of roller
- Double cone for roller Ø 410mm + front ploughshare
- Double cone for roller Ø 510mm + front ploughshare
- Double cone for roller Ø 580mm + front ploughshare
- Standard rear bed former bonnet
- Double standard rear bed former bonnet
- Central hydraulic ram for roller setting
- Double hydraulic ram for roller setting for mod. 300-420
- Two front lateral disk
- Two lateral wheels for depth setting
- Self- contained hydraulic plant on board with cooling system
Type |
Working width (cm) |
Working depth (cm) |
Power requirement (km) |
Blade quantity |
Weight (kg) |
G45 - 170 |
130 |
26 |
70-80 |
42 |
980 |
G45 - 200 |
150 |
26 |
70-80 |
48 |
1150 |
G45 - 230 |
170 |
26 |
70-90 |
54 |
1270 |
G45 - 250 |
200 |
26 |
80-100 |
60 |
1470 |
G45 - 280 |
230 |
26 |
30-120 |
66 |
1500 |
Drive on both sides as standard |
|||||
G45 - 300 |
300 |
26 |
110-130 |
72 |
1590 |
G45- 350 |
350 |
26 |
130-170 |
84 |
1720 |
G45 - 400 |
400 |
26 |
130-200 |
96 |
1800 |
G45 - 420 |
420 |
26 |
130-200 |
102 |
1880 |