Do Biogazu, CRI-MAN oferuje rozwiązania do wypełniania oraz mieszania frakcji w zbiornikach fermentacyjnych, jak i przesyłania substratu do separatora i oddzielania frakcji stałej od ciekłej.
MIXERS
Submersible mixers are used in digesters to mix and homogenise the substrate, thus increasing the output of the plant and prevent solids settling down, which in the long run might reduce the efficiency of the plant, for instance by clogging its pipes.
PUMPS
Motor-driven pumps, both submersible and external are used to feed the primary digester and/or handle the substrate between digesters and/or for mixing through the nozzles inside the digester. The chopping system provided on all CRI-MAN pumps aids the anaerobic fermentation process, thus improvig the efficiency of the plant.
SEPARATOR
Separators are used to separate the solid fraction from the liquid in the anaerobic fermentation process. The liquid fraction can be used as a fertiliser and for irrigation. The solid fraction can be used as an amender, as cattle beds, etc. Use of separators is also recommended as a pretreatment in nitrogen-reducing plants.
BIOGAS ACCESORIES
Service box is used to mount the mixers on the concrete covers of digesters. This solution is perfectly waterproof and can be used to move and rotate the mixer 225o while it works. In the event of unscheduled maintenance, it allows to take the mixer out of the digester while minimising gas leaks. In addition, it is provided with an inspection porthole to check the mixer at regular intervals. Entirely made of AISI 304 stainless steel.
Biogas bracket is used to mount the mixers on the wall and features a system that enables it to move up and down and rotate around the vertical axle. So the location of the mixers and the direction of the flow may be adjusted at any time. Entirely made of AISI 304 stainless steel.